英华利汽车模具系统(深圳)有限公司 |
部门不限
制程工程师
职位描述
岗位职责:Job descriptions:
1.持续改善:负责项目量产后的维护和持续改善,主动优化工艺提升效率以达到降低成本的目的,包括提高PPH,减人,提高产品良率
Continuous improvement: Maintain and continuous improvement for the project after mass production, process optimization, cost down, include PPH promotion, operators reduction, OK yield promotion
2.变更维护: 有变更的情况发行ECN,对相关文件进行更新维护,并与品质部交叉检查
EC: ECN release, revise documents, cross check with quality team
3.客户设变:负责量产项目的设变或变种的项目跟进,样品制作和寄样,文件更新
Customer EC: follow up the customer EC or new variants, samples building and shipping, documents revise
4.部门对应:及时处理各部门提出的问题
Internal coordinate: work out the issues raised by other Dept.
5.PFMEA 更新:根据PFMEA年度 Review 计划,至少每半年更新一次,包括高RPN 值的对策降低,客诉或内部品质问题的对策更新
PFMEA revise: revise the PFMEA half a year at least based on the annual review plan, high RPN reduction, customer or internal issues revise
6.工作失责处理:未按时完成工作计划的自行安排加班,未按工作流程工作作罚款处理,如造成工作重做或公司损失的将酌情作警告,记过,罚款处理;
Work default treatment: Self arrange overtime if work unfinished, fine punish for not obey the workflow, if cause work do over or company lose will be warned, record a demerit and fine punish.
7.其他:遵守公司规章制度,完成上级领导交待的临时工作任务;
Others: Comply with company rules and regulations, accomplish temporary work tasks from leader;
任职资格:
Job requirements:
1.大专或以上学历, 5年以上制程工程师相关经验;
College or above, more then 3 years PE experience;
2. 熟悉TS16949,APQP 及 PPAP流程,熟悉PFMEA等工具运用;
Know TS16949,APQP ,PPAP procedure and PFMEA well
3. 熟悉装配制程和工装的开发,有较强的防错意识,熟悉IE技术,有自动化工装经验更佳 ;
Familiar with assembly process and assembly fixture development, strong error proofing sense, IE skills, having automotive work piece experience is preferred;
4.熟练操作Office,AutoCAD软件 ;
Familiar with Office,AutoCAD;
5.要求经过TS16949,APQP,PPAP及相关培训
Trained of TS16949,APQP,PPAP ;
6. 英语读写流利,具备基本的听说能力;
Fluent reading and writing English and basic listening and spoken English;
7.服从上级领导的安排,保质保量按时完成工作任务;
follow the arrangement of the leader, finish the work on time and guarantee the quality.
8.具有积极向上的团队合作精神,有良好的沟通,协调能力,并能承受一定的工作压力。
面试需知
|